Spax Countersunk T-Star Plus T20 Stainless Steel Screws 4mm x 45mm (200 Pack)

The typical SPAX T-STAR plus drive is a so-called hexalobular internal. This shape increases the contact surface of our T-STAR plus and ensures optimal positioning for the T-STAR plus bits in the screw head. By enabling maximum force transmission from the screwdriver to the screw, T-STAR plus guarantees simple and ultra-fast work with much more efficiency than with other drives.

The countersunk head (also known as the flat countersunk head) has a polygonal underside (“pockets”) that mills its way into the wood and can therefore be countersunk without having to pre-drill the screw hole. The flat countersunk head sits flush with the surface.

The screws with partial thread are ideal for fastening thin components like engineered wood boards, panels and floorboards to thicker components like squared timbers or beams. The short thread penetrates the thick component, whilst the thread-free shank remains in the attachment. This creates maximum contact pressure between the two. The thread-free part should be at least the same thickness as the attachment.

The term 4CUT stands for the arrow-shaped design of the screw tip. These edges displace the wood fibres upon insertion and create space for the core diameter of the screw. The expansion at the core of the wood is reduced, preventing wood splitting around the edges. The required cordless screwdriver torque is also reduced, since the screw core no longer needs to “squeeze” into the wood.

With our stainless-steel screws, the abbreviation A2 refers to the alloy of the steel. Screws made of stainless steel A2 offer a high level of protection against corrosion and medium strength. However, they have low resistance to saltwater and acids. They are therefore used in outdoor applications in non-coastal areas.