Klober Roll Fix Concrete Dry Ridge & Hip Kit (5m)
Product code: RJH16500
A ventilating dry ridge and hip system, suited best for concrete tiles.
Product description
Part of Klober’s Roll Fix Offering; the Roll-Fix Concrete Kit is quick and easy to install, with no special tools required. In addition to this the kit is lightweight, safe and easy to handle.
Peace of mind is key, therefore the product complies with BS 8612 for performance, BS 5250 for ventilation and BS 5534 for mechanical fixing.
Available in 3 colours to blend with any roof, it comes as a complete kit, including:
1 x Roll (295 x 5m)
11 x Ridge to ridge seals
11 x Stainless steel screws and washers (100mm)
11 x Clamping plates
9 x Ridge batten straps
Product details
Ridge Colour
Anthracite
Length
5m
Roll Width
295mm
Material Description
Polypropylene membrane with a mesh fabric. Lower portion of each side flap: UV stable coloured aluminium coating
Minimum Pitch
15°
Maximum Pitch
45°
Brand
Klober
Manufacturer Brand Name
Klober
Manufacturer Product Code
KR5000-0402
Key features
- The seal comes with fixed lugs for easy application on concrete ridge and hip
- Mortar free, making it quick to install in most weathers conditions
- The all-in-one kit means you have everything required to complete the job
- To allow ridge ventilation, cut the underlay 30 mm short of apex on each side
- The method of fixing ridge battens will depend upon the type of roof structure. Once the ridge batten is in position, the ridge roll is rolled out along the ridge and stapled or nailed to the ridge batten
- Peel away the adhesive strip’s backing tape and push-fit the corrugated side flaps to follow the profile of the tiles and ensuring continuous contact The ridge tiles are secured by using the screw and washer provided to fix the Clamping Plate through the Ridge Seal into the ridge batten.
- Finish the ridge ends with either a Klober Ridge End Cap
- Full fixing instructions are available and included in the Roll-Fix Kit packs
- Suits most concrete ridge tiles
- Can be used on clay ridge tiles, where lugs do not interfere. Additional fixings would be required for 300mm clay ridge tiles
- Can be used on hips however trays and clips are not included