Rockwool 75mm SP60 FireStop Insulation Slab - 1m x 650mm

The SP FireStop Slab® provides a unique lateral compression to facilitate a tight fit between substrates. As a simple to use, cut and install solution, the ROCKWOOL SP FireStop System comprises of both the SP FireStop Slab and SP FireStop fixing brackets. A medium density ROCKWOOL slab, it incorporates a foil facing to both sides which helpfully includes cutting lines to support accurate installation. Whilst resisting the passage of smoke and providing up to 2 hours fire resistance, the SP FireStop System can achieve a fire resistance rating of up to 2 hours. Protecting against both movement of +/- 3% and also acoustic loss, this ROCKWOOL product has outstanding acoustic properties, significantly reducing the levels of sound transmission through wall and floor cavities.

Suitable for a wide variety of purposes including within masonry constructions, curtain walling systems and large cavity voids. ROCKWOOL SP FireStop Slabs are designed for cutting on site with a sharp knife or saw and a straight edge.
The SP Firestop 60 & 120 may be installed horizontally or vertically in cavity widths up to 400mm. The dry fit system saves time and resources on site. For easy compression fitting and to accommodate the fixing pattern, cutting should be along the 1000mm length. The SP Fixing Brackets are then re-profiled by hand and cut as necessary to allow at least 75% penetration of the fire stop material.